Get $500 off this month when you try our garage floor coating systems
Get $500 off this month when you try our garage floor coating systems
Signed in as:
filler@godaddy.com
We clean the surface and check if there are any cracks and holes in the concrete. If there are any gaps, we will fill and then grind them to make the surface level.
Also in some cases we will clean, repair, and fill up the expansion joints.
After testing the floor we will Grind the concrete with 30 or 40, 60 or 80- grit diamond bonded metals to git rid of the top layer for example adhesives were used on the concrete for carpets or any other existing top coat.
We use extra soft diamonds to grind very hard concrete and soft diamonds to grind hard concrete
we using 30- OR 50-OR 100- AND 200-grit resin pads.
To clear away any scratches that could have been left by the metal abrasives used during grinding, Then we will use 30-or 50-grit resin pads that will give us a smooth transition from the metal diamonds to the resin diamonds.
next we will use the 50- or 100-grit resin pads to make the surfaces smoother.
Then finish up with the 200-grit resin pads to have a final touch.
we will apply the densifiers and stains after using the final 200-grit resin pads and higher. The reason of adding the densifiers here is to harden the concrete.
We will first add the stains, wait for them to dry (if used), then apply the concrete desifier . then add another coat of the densifier if necessary to make the concrete even harder.
Once the densifier and stains have completely dried out,
we will use 400-grit pads to make the surface smoother, and Continue to do so till we see the floor getting the glossy appearance.
The final step after polishing the floor using the 400-resin grit diamond pads, polish the entire surface using 800, 1500 and 3000 grit resin pads to finish up the polishing process.
Medium gloss- you can just stop the polishing after using the 800-grit resin pads and the 1500-grit resin pads.
Higher gloss- use the 3000-grit resins pads to complete the polishing process. (looks just like glass)
This step is optional, if you want to make the gloss shinier. For this step, you will use your polishing pads on a burnisher to give the concrete the maximum shine.
At DCS, we would recommend to use Polish Concrete in a dry places with high traffic areas such as: Wear-Hose Concrete Floors , Big Basements, Stores etc.
Copyright © 2024 Diamond Coating Solution - All Rights Reserved.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.